top of page

PASSION MP 6000H/RP 6000

The PASSION MP 6000H headband condenser microphone and wireless body-pack transmitter are designed and developed for applications in broadcast studios, theaters, houses-of-worship, corporations, schools, concert halls, and other live performance venues. The PASSION MP 6000H body-pack wireless transmitter features a ¼ Wave Flex Antenna, High-Density ABS Body, Belt-Clip, IR Port, On/Off Switch, Auto-Impedance Matching Mini XLR Input, Volume Control, Battery Compartment, Frequency Setting Buttons, and a Backlit LCD displaying Group, Channel, Frequency, as well as Battery Life. You can also convert your musical instrument into wireless on this system using either the complementary CP 2 Instrument Converter Cable or any other optional supported accessories.

Coupled with C.R.I.S.T.A.L.® Audiophile PreAmps, Advanced Hybrid Signal-Enhancing Filter (AHSEF)™, and Phase-Locked Loop (PLL)™ synthesized technology, the PASSION RP 6000 wireless receiver system is able to send and receive secured audio transmission in great clarity. The PASSION RP 6000 comes ready with a total of 100 UHF Preset Channels over 10 Groups, 4-Step Transmission & Reception Power Level (POL), AF & RF Signal Strength Level Meters, Quiet Power-Up/Shut-Down Design, Infrared (IR) Synchronization, and Frequency Scan. 

The GECKO® PASSION 6000 wireless systems are manufactured-on-demand (MOD).



GECKO® PASSION MP 6000H Headband Condenser Microphone

  • Element: Pre-Polarized Condenser

  • Principle of Operation: Pressure Gradient

  • Polar Pattern: Cardioid

  • Frequency Response: 20Hz ~ 20kHz

  • Sensitivity: 6mV/Pa; -44 dB re. 1V/Pa

  • Output Impedance: ≤100Ω

  • Noise Level: ≤38dB

  • Power Requirements: 1.5V ~ 10V DC

  • Cable Length: 1.25m

  • Output Connector: Mini XLR Female

  • Color: Light Skin Tone


GECKO® PASSION CP 2 Instrument Converter Cable

  • Cable Length: 1m

  • Output Connector: Mini XLR Female

  • Input Connector:  ¼” TS

  • Color: Black

GECKO® PASSION MP 6000H Body-Pack Transmitter

  • Frequency Response: 20Hz ~ 20kHz

  • Frequency Range: UHF: 600 ~ 952MHz (Region Dependent)

  • Preset Channels: UHF: 100

  • Oscillation: Phase-Locked Loop (PLL)™ Synthesized

  • Stability: ±0.005% (-10°C ~ 50°C)

  • AF Input: Mini XLR Male

  • RF Output: 10mW

  • Display: Backlit LCD

  • Interface: Infrared (IR) Synchronisation

  • Power Switch: Digital Relayed ON/OFF

  • Power Requirements: 2 x 1.5V AA Alkaline Batteries (≥1800mAH)

  • Controls: Power ON/OFF, Volume, SET Frequency

  • Operating Time: 10 Hours (Batteries Dependent)

Physical Properties

  • Case Material: High-Density ABS

  • Color: Black

  • Weight: 70g (without Batteries)

  • Dimension: (H) 88mm x (W) 65mm x (D) 25mm; 

  • Antenna: ¼ Wave Flex, (L) 82mm

GECKO® PASSION RP 6000 Receiver

  • System: C.R.I.S.T.A.L.® Audiophile PreAmps, Advanced Hybrid Signal-Enhancing Filter (AHSEF)™, Infrared (IR) Synchronization, Frequency Scan, 4-Step Transmission & Reception Power Level (POL)

  • Frequency Range: UHF: 600 ~ 952MHz (Region Dependent)

  • Preset Channels: 100 (10 Groups x 10 UHF Channels)

  • Oscillation: Phase-Locked Loop (PLL)™ Synthesized

  • Stability: ±0.005% (-10°C ~ 50°C)

  • THD + N: <0.5%, @ 1kHz

  • Frequency Response: 20Hz ~ 20kHz

  • Output Connectors: Balanced XLR Male, ¼” TS, Unbalanced

  • Display: Backlit LCD (63mm*22mm) 

  • Power Switch: Digital Relayed ON/OFF

  • Power Requirements: 12~18V DC, 1000mA

  • Antenna Connections: BNC

Physical Properties

  • Case Material: Steel

  • Color: Black

  • Weight: 1.1kg, without Antennas

  • Dimension: (H) 44mm x (W) 210mm x (D) 180mm

  • Antenna: (L) 215mm

Included Accessories

  • UHF Antennas (2)

  • Universal Power Adapter

  • 1.5V AA Alkaline Batteries (2)

  • GECKO® PASSION CP 2 Instrument Converter Cable

  • Windscreen

  • GECKO® PASSION Microphone Case

bottom of page